Transport And Set Up The Device - VOLTA ecoPowerTrolley Technical Manual

6 Transport and set up the device

6 Transport and set up the device
Requirements for the transport route
Make sure that the following requirements are met:
The floor is loadable, as level as possible and free of obstacles.
•
The ambient conditions at the installation site correspond to the technical data.
•
All operating elements and connections are freely accessible at the installation site.
•
Special requirement for the installation site during operation (discharging)
SAFETY INSTRUCTION
Hot cooling fins during operation when discharging (max. 65 °C).
Danger of heat accumulation.
Keep a minimum distance of 20 cm from people, objects and walls all around.
Wear the device
Device with runners without wheels and feet: Carry the device by the carrying handles in groups of
four people.
Moving the device
Device with wheels and feet: Lift the device to move it.
SAFETY INSTRUCTION
Heavy equipment.
Danger of tipping over when the center of gravity is exceeded.
Lift the device only as far as is necessary to move it.
18 BA_ecoPowerTrolley_1.4_en