PowerXL Duo NutriSealer HR0013 Owner's Manual page 11

Instructions For Use
Connecting the VTA to Bottles and Vacuum Sealer Zipper Bags
1. Push the small end of the accessory tubing onto the
Vacuum Port on the inside of the appliance (see Fig. L).
2. Place and firmly hold the large end of the VTA onto
the Air Valve of the Bottle Stopper (see Fig. O) or
Vacuum Sealer Zipper Bag (see Fig. P). Be sure to
include the Sealer Cap with the VTA.
Fig. O
Connecting the VTA to a
Canning Jar
1. Push the small end of the accessory tubing onto the
Vacuum Port on the inside of the appliance (see Fig. L).
2. Set the Canning Jar Lid onto the jar opening and then
fully cover the top of the Canning Jar Lid with the
Canning Jar Sealer.
3. Place and firmly hold the large end of the VTA onto the
air valve of the Jar Sealer). Be sure to include the Sealer
Cap of the Vacuum Tube Attachment (see Fig. Q).
4. Press Vacuum Only Button to vacuum out the air of the
jar. The Indicator Light will turn off when completed.
5. Carefully remove the Jar Sealer and VTA, taking care to
not break the seal.
6. Screw on the Canning Jar Ring.
3. Press Vacuum Only Button to vacuum out the air of
the bottle or Vacuum Sealer Zipper Bag.
4. The Indicator Light will turn off when completed.
NOTE:
The VTA can be used to seal Vacuum Sealer
Zipper Bags of any size.
Fig. P
Vacuum
Tube with
Sealer
Cap
Jar
Sealer
Canning
Jar Lid
Canning
Jar
Fig. Q
To Vacuum Seal a
Canning Jar
Assemble the parts in
this configuration.
The Canning Jar Ring
can be screwed on
after the jar is Vacuum
Sealed and the
VTA and Jar Sealer
are removed.
Canning Jar Ring
11
PowerXL ® Duo NutriSealer ™