First Flight Preparation; Flying Checklist; Installing The Dxs Transmitter Batteries (Rtf) - Horizon Fitness BLH1250 Instruction Manual

First Flight Preparation

❏ Remove and inspect contents
❏ Begin charging the flight battery
❏ Program your computer transmitter (BNF only)
❏ Charge the flight battery
❏ Install the flight battery
❏ Bind your transmitter (BNF only)
❏ Familiarize yourself with the controls
❏ Find a suitable area for flying

Installing the DXs Transmitter Batteries (RTF)

The LED indicator flashes and the transmitter beeps
progressively faster as the battery voltage drops.
Replace the transmitter batteries when the transmitter
begins to beep.
CAUTION: NEVER remove the transmitter
batteries while the model is powered on. Loss
of model control, damage or injury may occur.
CAUTION: If using rechargeable batteries,
charge only rechargeable batteries. Charging
non-rechargeable batteries may cause the batteries
to burst, resulting in injury to persons and/or damage
to property.
CAUTION: Risk of explosion if battery is
replaced with an incorrect type. Dispose of
used batteries according to national regulations.
EN

Flying Checklist

❏ Always turn the transmitter on first
❏ Plug the flight battery into the lead from the ESC
❏ Allow the receiver and ESC to initialize and arm properly
❏ Fly the model
❏ Land the model
❏ Unplug the flight battery from the ESC
❏ Always turn the transmitter off last
4