Page 2
This manual corresponds to the following references: 0012994 H2994 for CDB & CDS 0014706 H4706 for CA and CF 0014720 H4720 for CS 0014719 H4719 for CP Packing List The following items are included: Tool Holder....1 unit Manual ....... 1 unit Ref.
Page 3
Changing the Tool Holder Turn the station off and allow the equipment to cool down. Remove the locking knob (1) and separate the holder from the station. Then remove the connection screw (2). Locking Connection max. Knob Screw 15 mm Pull the tool holder gently until the connector comes out.
Page 4
Complies with CE standards ESD Safe Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.