Synology DiskStation DS918+ Hardware Installation Manual page 13

LED Indicator Table
LED Indicator
STATUS
DISK 1-4
Power
Rear LAN
(on upper side of jack)
Rear LAN
(on lower side of jack)
Model specifications are subject to change without notice. Please refer to
Note:
1
Please try to restart your DiskStation or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the
health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains
unresolved, please contact Synology Technical Support for help.
13
Color Status
Green Static
Orange Blinking
Off
Static
Green
Blinking
Orange Static
Off
Static
Blue
Blinking
Off
Static
Green
Blinking
Off
Green Static
Orange Static
Off
Description
Volume normal
Volume degraded / Volume crashed
Volume not created
DSM not installed
HDD hibernation
Drive ready and idle
Accessing drive
Drive error / Port disabled
No internal drive / Deep sleep
Powered on
Booting up or shutting down
Powered off
Network connected
Network active
No network
Gigabit connection
100 Mbps connection
10 Mbps connection / No network
www.synology.com for the latest information.
Appendix
B
1