Descale Function - Beko CEP 5304 X User Manual

6 Cleaning
6.1 Cleaning the Milk Tank
Pour water in the milk tank until MAX level and press the milk foam button "
out the milk tank components (9) (11) and clean them under clean water.
Clean the milk tank after each use to avoid milk residue.
6.2 Cleaning/Rinsing Function
For cleaning the brewing head, place a container under the brewing head and press the cleaning button
" ". Cleaning will be completed within 16 seconds and the machine will be ready to use.
If you do not use the machine for more than 5 consecutive days, rinse and drain the
•
water tank.
Drip tray and its grid (6) (4) can be cleaned manually under clean water.
•
• Do not put the portafilter into the dishwasher.

6.3 Descale Function

When descaling is required, descale icon "
under the brewing head. Pour water into the water tank until MAX level and mix with scale remover or
citric acid. Press & hold descale button "
which indicates that the first cycle of descaling has begun. The first cycle will take around 15 minutes.
Once completed, the descale icon will turn white "
Empty and replace the container under the brewing head. Clean and fill water tank until MAX level with
clean water. Press & hold descale button "
sounds which indicates that the second cycle of descaling has begun. The second cycle will take around
6 minutes. Once all complete, the machine will go back to idle stage and will be ready to use.
Descale is required after predefined brewing cycle.
•
Resetting descaling warning status is not suggested for maintaining the best condition
•
of the appliance.
Semi-Automatic Espresso Machine / User Manual
" will light up as orange. Place a container that can hold 1.5L
" for more than 3 seconds and you will hear two beep sounds
".
" for more than 3 seconds and you will hear two beep
To reset descale warning status:
Press and hold power and descale button together for more than
3 seconds.
". Once completed, take
15 / EN