The Lcd Display - LG STEAM DRYERS DLEX3001W User's Manual & Installation Instructions

THE LCD DISPLAY

The display shows the settings, estimated time remaining, options, and status messages for your
dryer. When the dryer is turned on, the light in the display will illuminate.
STATUS/CYCLE DISPLAY
1
This portion of the display shows the
selected cycle, operating status, and special
messages. If a cycle has special instructions,
they will also be displayed in this area.
ESTIMATED TIME REMAINING
2
When the START/PAUSE button is pressed,
the dryer will display the estimated (SENSOR
DRY) or set time (TIME DRY) remaining, and
begin tumbling.
NOTE: The cycle time on SENSOR
DRY cycles may fluctuate as the dryer
recalculates drying time for optimal results.
CYCLE SETTING INDICATORS
3
These indicators show the current cycle
settings for DRY LEVEL, TEMP. CONTROL,
TIME DRY, and BEEPER. To change these
settings, press the appropriate settings
button.
CYCLE COMPLETION INDICATOR
4
Shows how much of the current drying cycle
has been completed.
30
5
8
4
1
6
7
3
CHILD LOCK INDICATOR
5
When CHILD LOCK is set, the Child Lock
indicator will appear and all buttons are
disabled except the ON/OFF button. This
prevents children from changing settings
while the dryer is operating.
ADD WATER INDICATOR
6
If the steam feeder is lack for water, this
error may be displayed. Fill the feeder and
restart the cycle.
7 LINT FILTER INDICATOR
The dryer automatically detects reduced
air flow caused by a full lint filter. The LINT
FILTER indicator will light before each load
as a reminder to check the lint filter before
starting each load. If the lint filter becomes
clogged during a load, the indicator will
come on to let you know that the filter
should be cleaned immediately for maximum
efficiency. Always clean the lint filter before
every cycle.
2