Standard Accessories - Hitachi NT1865DBAL Handling Instructions Manual

<NT1850DBSL>
18 Gauge brad nails
(straight)

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 17.
Standard accessories are subject to change without notice.
APPLICATIONS
<NT1865DBAL, NT1865DBSL>
○ Nailing as fi nishing process for areas around the doors,
windows as well as edgings.
○ Securing the bottom of drawers. Making various cases
and cabinets.
<NT1850DBSL>
○ Cabinet and picture frame assembly, furniture trim.
○ On-site and mobile home trim and molding.
Before
charging
While
charging
Charge
indicator
lamp
(RED /
BLUE /
Charging
GREEN /
complete
PURPLE)
Overheat
standby
Charging
impossible
Indications of the charge indicator lamp
Lights for 0.5 seconds. Does not light for
Blinks
0.5 seconds. (off for 0.5 seconds)
(RED)
Lights for 0.5 seconds. Does not light for 1
Blinks
second. (off for 1 second)
(BLUE)
Lights for 1 second. Does not light
Blinks
for 0.5 seconds. (off for 0.5 seconds)
(BLUE)
Lights Lights continuously
(BLUE)
Lights continuously
Lights
(GREEN) (Continuous buzzer sound: about
6 seconds)
Lights for 0.3 seconds. Does not light for
Blinks
0.3 seconds. (off for 0.3 seconds)
(RED)
Lights for 0.1 seconds. Does not light for
Flickers 0.1 seconds. (off for 0.1 seconds)
(PURPLE)
(Intermittent buzzer sound: about 2 seconds)
Min
1.9mm
1mm 1.25mm
Excluding nails that measure 35mm in length
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in Fig. 2
(on page 18).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 3)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 3, according to the condition of the
charger or the rechargeable battery.
Table 3
9
Max.
Plugged into power source
Battery capacity at less than 50%
Battery capacity at less than 80%
Battery capacity at more than 80%
Battery overheated. Unable to
charge. (Charging will commence
when battery cools)
Malfunction in the battery or the
charger