Asko WMC67 P Series User Manual page 36

Cleaning and maintenance
If you are using hard water
If you are washing with hard water (causing limescale build-up), a greyish-white film may appear
on the washing machine drum. To remove this film, add vinegar (approximately 2 dl or sodium
bicarbonate "baking soda" (1 tablespoon or 15 g)) into the washing machine drum and select any
program with a temperature of 90 °C, or the Drum Cleaning program. See STEP 5: Choose the
program.
Repeat the process as necessary.
36
1
Insert a screwdriver or a similar tool into the slot
in the rib and carefully push it to the left.
2
Hold the rib with the other hand and pull it
towards you.
3
Lift the drum rib.
4
Remove any objects.
5
Place the rib into the installation slot indicated
with "F" towards you. Make sure all ribs are firmly
in place in their respective slots in the drum. Push
the rib inwards (as indicated by the arrow in the
figure) until it snaps.