Honda CRF230F 2019 Manual page 114

LEFT SIDE
(6)
(6)
(5)
(2) chain slider
(3) chain guide slider
(4) chain roller
(5) lower slider
5. Replace the drive chain if chain slack is
excessive when the rear axle is moved to the
farthest limit of adjustment. Excessive slack
indicates the chain is worn beyond its service
limit.
(2)
(4)
(3)
(7)
(6) cutouts
(7) wear inspection
window
To check the chain's service limit, measure
the distance between a span of 41 pins, from
pin center to pin center. If the distance
exceeds the service limit, the drive chain is
worn out and should be replaced.
Measure a span of 41 pins
25.0 in (635 mm)
New Chain:
25.1 in (637 mm)
Service Limit:
This motorcycle has a staked master link
drive chain which requires a special tool for
cutting and staking. Do not use an ordinary
master link with this chain.
Drive Chain
(cont'd)
Servicing Your Honda
107