Operation; Intended Use; Unintended Use - Scholl 2006/AT Instructions For Use Manual

GBA A 0550 1 E
5 O
PERATION
The plate warmer has a main switch with indicator lamp and a thermostat.
The main switch switches the plate warmer on and off. The thermostat sets the temperature.
Main switch off
Main switch on
Indicator lamp dark
Indicator lamp lit
Thermostat off
Thermostat 85°C
5.1 I
NTENDED USE
Practice:
 Switch the main switch on.
 Turn the thermostat to the maximum temperature (position "right").
 After the heating time, the device is ready for operation and can be equipped with the plates.
 Set the thermostat to the desired temperature.
 For switching off after use:
 Turn the thermostat to the left in the position "left". The signal lamp goes out.
 Switch the main switch off.
Do not touch the device surfaces. The surfaces of the device may grow hot. Please
let the device cool off entirely before cleaning it. Do not cover the device.
Danger of burns and fire!
5.2 U
NINTENDED USE
Please observe strictly:
 Plate warmer are
not for defrosting/warming up of deep-frozen/cooled food.
BA
Last revised 01-2018
Position "0"
Position "1"
Heating off
Heating on
Position "MIN"
Position "MAX"
Page 12 of 22 Januar 18, 2018
Rev. 1