Advertisement
adjusting the angle
1
Place the monitor mounted on the stand base in an upright position.
2
adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing
experience.
warNING
•
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor' s frame as
illustrated below.
•
Be careful not to touch or press the screen area when adjusting the angle of the monitor.
NoTE
•
The left or right side of the monitor head can be slightly rotated up or down (up to 3°). adjust the horizontal
level of the monitor head.
monitor head
using the Kensington Lock
The connector for the Kensington security system is located at the back of the monitor.
For more information on installation and usage, refer to the Kensington lock owner' s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NoTE
•
The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
7
Advertisement
