Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Close the display and turn the computer over.
2
Align the screw holes on the battery with the screw holes on the
computer base and place the battery on the computer base.
3
Replace the screws that secure the battery to the computer base.
4
Route the hard-drive cable through the routing guides on the battery.
Post-requisites
Replace the
base
computer. After working inside your
cover.
After working inside your
15