GE Profile GVE Series Owner's Manual & Installation Instructions page 39

Troubleshooting Tips... Before you call for service
Problem
Water is leaking from dispenser
AUTO FILL
AUTO FILL overfills
cooling
Ice dispenser opens after closing
My refrigerator door squeaks
49-1000332 Rev. 4
Possible Causes
Air may be present in the water line
system, causing water to drip after
being dispensed
Not all containers work with
AUTOFILL
Error message
Not all containers work with
AUTOFILL
Normal, when refrigerator first
plugged in or after extended power
outage
Normal
accidental cleaning of the lubricant
on the hinge
Improper leveling
If doors were removed and re-
assembled during installation
under Top Hinge cover may get out
of position and rub against door
while door swivels.
What to Do
remove air from system
Try different container
See page 11
Clean sensor. See page 11.
Try different container
Ensure hands are away from the cup
Wait 24 hours for temperature in both
compartments to reach selected
temperatures.
The ice dispenser door may open after
It is best to order GEA lubricant service
part number WR97X166 and apply on
the hinge at specified location.
It is possible to spray some non-toxic
lubricant such as silicone based non-
stick cooking spray, petroleum jelly or
IMPORTANT:
will remove any remaining grease in or
around the hinge
Make sure the unit is leveled
Remove the Top Hinge cover and make
sure the waterline and harness that
passes through the hinge pin has been
properly seated and does not touch the
any of the door parts during rotation.
Applying some food grade lubricant
around door thimble area will also help.
39