Basic Operation Important Safeguards - Polaroid TDM-1311 Manual

Basic Operation
Connect to power
Connect the power supply cord to a 120V AC convenience outlet. Disconnect the power if the unit is not to
be used for a long period of time.
Power on/off
Turn on the unit by pressing the POWER button on the main unit (or the POWER button on the remote
control).
Energy saving feature
The TV will automatically switch to standby mode if no any signal received after 15 minutes. Press the
POWER button on the main unit (or on the remote control) to turn on the power.
Change channels
Change the TV channel by pressing the CH/ button on the main unit (or the PROG/ button on the remote
control). When the ANTENNA is in "AIR" mode, enter two digits by using the remote control to select the
desired TV channel.
For example,press No 0 and No 2 to select channel 2. When the ANTENNA is in "CABLE" mode, enter
three digits to select the desired TV channel. For example, press and hold No 1 for 2 seconds to display "1-
-", then enter the other two digits.
7