Page 3
WARNING Warning! - This symbol is intended to alert you to the presence of dangerous voltage with the product’s en- closure that may be of sufficient magnitude, to reduce a risk of electrical shock or fire. Do not expose the unit to rain or moisture.
Important Safety Instructions 01. Read these instructions. 02. Keep these instructions. 03. Heed all warnings. 04. Follow all instructions. 05. Do not use this apparatus near water. 06. Clean only with a damp cloth. 07. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
Important Safety Instructions When the power cord or plug is damaged or frayed. If liquid has been spilled onto the DVD-Player. If the DVD-Player has been exposed to rain or moisture. If the DVD-Player does not operate normally after you have followed the operating instructions. Ad- just only those controls covered by the operating instructions;...
Introduction This section describes a full-fuction high performance DVD Player that is microprocessor-controlled and also allows users to place their own settings into memory via external setting. The setting status is indicated on the screen. Front Panel (1)POWER (2)PLAY (5)PREV./NEXT (6)OPEN/CLOSE Rear Panel 2 Channel...
Introduction Remote Control Functions ( 1 ) POWER ( 2 ) PBC ( 6 ) SEARCH ( 7 ) ANGLE (11) MENU (12) ZOOM (16) SLOW (17) STOP (21) NTSC/PAL (22) VIDEO (OPTION) (25) MUTE (26) VOL- / VOL+ Prepare the Remote Control To operate the DVD player , you must place the batteries in the remote control first.
Getting Started Video Connection Video Output Connect the DVD player’s video output (RCA connec- tor or S-Video) on the rear panel to the TV’s video input (or other devices) using AV, S-Video or Component. YELLOW S-Video Output If your display device supports S-Video terminal, you can also connect your display device to DVD player’s S-Video Output connector on the rear panel.
Basic Operation Playing a DVD 1.Press the Power button to turn on the player. 3.Insert a disc. Front Panel Operation 1.POWER Turn on or turn off the player. 3.PAUSE Momentarily stop the program on the disc. Press “PLAY” to return to normal play. 5.PREV./NEXT Go to the next chapter or track.
Basic Operation Remote Control Operation 1.POWER Turn on or turn off the player. 2.PBC Playback control. Press “PBC” (on) to program selected chapter. The root menu will appear. Press PBC(off) to play movie uninterrupted. 3.DISPLAY “ ” 4.EJECT Press “EJECT” to open the disc tray. Place a Disc on the tray dish. Hold the disc with- out touching the surface, position it with the printed title side facing up, align it with the guides, and place it in its proper position.
Page 12
Basic Operation 7.ANGLE Some DVD discs may contain scenes that have been filmed simultaneously from a number of different angles. For these discs, the same scene can be viewed from various angles using the “ANGLE” button. (The recorded angles varies depending on the disc.) This function is only for DVD discs.
Page 13
Basic Operation 17.STOP Press this button to stop playing a disc. 18.PREVIOUS, F.R. / NEXT, F.F. Press these buttons all the time to change the speed during play. And press them once to change the chapter or track. 19.1/ALL Repeat Chapter Press “1/ALL”...
Page 14
Basic Operation 25.MUTE Press this button to mute sound. Press it again to restore sound. 26.VOLUME Use “ VOL-” or “ VOL+” button to adjust the output volume. 27.VOCAL-ASSIST You can select Left channel output only or Right channel output only or Stereo output. 28.3D ”...
Special Operation What is MP3 MP3 is a new music format which is capable of playing the music on the internet. What is JPEG JPEG is short for the “Joint Photographic Experts Group”, a group of experts nominated to produce standards for continuous tone image coding.
System Configuration Use the Setup Menu display to change the system configuration. In this section, each item on the Setup Menu display will be described. Use “ ” buttons to select the item that you want and press “PLAY” or “ENTER” button to confirm. System Setup Page Setup different function of DVD player and the TV set.
System Configuration Language Setup Page NOTE: Subtitle language menu lan- guage are only valid to the setup of DVD discs. OSD LANGUAGE OSD has eight different languages: ENGLISH, CHINESE, GERMAN, SPANISH, FRENCH, PORTUGUESE, ITALIAN and DUTCH. If you choose a language, the menu will be all in the language. AUDIO LANGUAGE AUDIO LANG setup has eight different languages: CHINESE, ENGLISH, JAPAN, FRENCH, SPANISH, PORTUGUESE, GERMAN and LATIN.
System Configuration Audio Setup Page AUDIO OUT AUDIO OUT has three different types: for common AV output, please choose “SPDIF/OFF”; for optical or coaxial output, please choose “SPDIF/ RAW” or “SPDIF/PCM”. (for KARAOKE function) Use “ ” directional buttons to adjust the tone of the music. Choose “...
System Configuration Video Setup Page BRIGHTNESS Press “ ” to adjust brightness. CONTRAST Press “ ” to adjust contrast. Press “ ” to adjust hue. SATURATION Press “ ” to adjust saturation. DE-INTERLACE Press “ ” to adjust de-interlace. EXIT SETUP Return to the main setup page.
System Configuration Digital Setup Page Exit Setup Page EXIT SETUP MENU Press “PLAY” to exit the Setup Menu. OP MODE Use “ ” to select “LINE OUT” or “RF REMOD”. DYNAMIC RANGE Press “ ” to adjust the linear compression rate of the signal. DUAL MONO This is the output mode of the L and R signals of the set audio output.
Appendix (Definition of Keywords) Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.) With such discs, the ANGLE button can be used to view the scene from different angles.
Need help?
Do you have a question about the DVP-1000 and is the answer not in the manual?
Questions and answers