Safety Precautions The lighting flash with arrowhead symbol, within a triangle, alerts the user to “dangerous voltage” which could cause electric shock. The exclamation point within a triangle indicates to the user to read important operating and maintenance instructions in the manual. NOTES Read these instructions.
Supports both “Progressive Scan” “Interlaced” televisions. IMPORTANT: Ensure the selection switch on the back of the DVD player matches your television type. HIGH QUALITY PROPERTY 1. High Resolution Progressive scanning function doubles the vertical resolution of a normal DVD player.
About Discs DISC LOGO The disc manufacturer specifies operation instructions for some DVD discs. Please refer to the instruction manual for details. NOTES 1. Using of Discs Do not touch the playing surface of the compact disc. Do not stick paper or label on the disc.
Parts Introduction Front Panel 1. POWER button -Press to turn on/off the power. 2. Disc tray -Used to load disc Display panel -Indicates the current status of the unit. 4. Remote sensor -Receiving the signal from the remote control. - 5 - 5.
Parts Introduction Display Panel 1. DVD disc indicator 2. Playing/pause status indicator 3. CD disc indicator 4. Dolby double-D mark indicator 5. Angle indicator (for DVD discs with multi-angle) 6. MP3 disc indicator 7. Reading status indicator 8. Disc playback status indicator Rear Panel 1.
Remote Control Functions 1. Power -Press to turn the DVD player on or off. 2. Angle -Press to access various camera angles (if the DVD disc contains multiple camera angles). 3. Audio -Press to access various audio languages (if the DVD disc contains multiple audio languages).
Composite Video 1. Connect the VIDEO OUT jack on the DVD Player to the video input jack on the TV using the video cable supplied. 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right input jacks on the TV using the supplied audio cables.
1. Connect the COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding input jacks on the TV using a Y/Pb(Cb)/Pr(Cr) cable supplied. 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right input jacks on the TV using the supplied audio cable.
When DVDs encoded in Dolby Digital or DTS are played, the Dolby Digital or DTS bit stream is outputted from the player’s coaxial digital audio output. When the DVD player is connected to a Dolby Digital or DTS decoder, you can enjoy theater quality audio in your home. A coaxial audio cable is required for these connections, as shown below.
Remote Control Operation Battery Installation Insert the batteries supplied while observing the correct (+) and ( ) polarities. Service life of Batteries The batteries normally last for about six months, although this depends on how often, and for what operations, the remote control is used.
Setup menu. First, make certain that the DVD Player is properly connected. Turn the DVD Player on by first pressing the POWER button. For this process, however, you do not need to load a disc into the unit.
Page 15
System Setup General Setup When you enter the Setup menu, use the ( / ) buttons to highlight the General Setup, then press the button to access the General Setup. The left column shows the items in the General Setup. The right column shows the current setting for each item.
Page 16
select your language preference. System Setup Captions Select the Captions menu by pressing the ( / ) Navigation buttons until CAPIIONS highlighted and then press the button to access the submenu. This setting allows you to select “ON” or “OFF”. - - GENERAL SETUP PAGE - - TV DISPLAY ANGLE MARK...
Page 17
System Setup Audio Setup In the Setup menu, use the ( / ) Navigation buttons to highlight the Audio Setup; press the ENTER button access submenu. The left column shows the items in the Audio Setup menu. The right column shows the current setting for each item.
Page 19
System Setup Audio Select AUDIO with the ( / ) buttons, if it is not already selected; press the button to access the Audio submenu. The right column displays current (highlighted) and the options. Press the ENTER button to choose your favorite audio language.
Page 21
System Setup Disc Menu Select the Disc menu by pressing the ( / ) Navigation buttons until DISC MENU is highlighted and then press the button to access the submenu. This setting allows you to select the language. - - PREFERENCE MENU - - AUDIO SUBTITLE DISC MENU...
Page 22
System Setup Default Select Default pressing the ( / ) Navigation buttons until DEFAULT highlighted and then press the button to access the submenu. - - PREFERENCE MENU - - AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT >RESET MAIN PAGE To reset the unit to the original defaults, press the ENTER button to confirm.
You can select any one of titles or chapters quickly by using the Numeric buttons to enter the number of the chapter. REGION CODE This DVD player plays Region 1 DVD discs. 3. Load the disc Load the disc as...
Page 24
DVD disc, press the AUDIO button on remote control to select language. SUBTITLE The DVD player can support up to 32 kinds of subtitles. When you play a multi-subtitle disc, press the SUBTITLE button on remote control to select subtitle.
Normal Operation CD Playback The player will play all tracks continuously in default status. You can press the (PREV/NEXT SKIP) buttons or Numeric buttons to select the track or your choice. MP3 Playback MP3 is the third audio compression format of the international standard MPEG.
Normal Operation JPEG Playback JPEG is a common picture format that requires few bytes of storage per image low loss rate in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view digital albums, use your film development to make a “PICTURE CD”, in JPEG format.
Playback Functions STOP When you press the STOP button in DVD playback, playback will stop, but you can resume playback from the same point by pressing the PLAY button (for DVD discs). Press the STOP button twice to stop playback completely and return to the beginning of the disc. PAUSE Press the PAUSE/STEP button on remote control to pause, and press it repeatedly to achieve frame-by-frame playback.
Page 28
Playback Functions FAST FORWARD & REWIND Press the forward or rewind. SLOW FORWARD & REWIND Press the SLOW button to activate slow forward or rewind. „ There is no slow playback function for CD and MP3 discs. DISC INFORMATION DISPLAY Press the DISPLAY button on the remote control to display relevant disc information.
Troubleshooting SYMPTOM The player will not play or displays “NO DISC”. There is no sound. There is no picture. Picture move up and down. Unsteady. Cannot continue to play play section repeatedly. The remote control does not work. Others: Static or other external interfere may cause the abnormity of the player. In this circumstance, unplug the power-supply cord from the outlet.
power and consult your service center or a qualified technician. Specifications Laser Wavelength Video System Frequency Response Audio Signal-to-noise Rate Audio distortion + noise Channel Separation Dynamic Range Analog Audio Out Audio Out Digital Audio Out Video Out Video Out S-Video Out Power AC120V~ 60Hz...