Table of Contents
Advertisement
The line in detection levels are as follows;
SILENCE (L) HIGH—Sets up the detection level high used whent the detection levels between
the sound source/tracks are low or the noise is low.
SILENCE (L) MID------------Setup for a normal line in recording (default).
SILENCE (L) LOW-----------Sets up the detection level low; used when the detection levels
between the sound/source tracks are high or the noise is loud.
※ Caution : If the sound source level is too low, the recording may not be available.
Adjusting the Sampling Frequency of a Line in Recording
Press the MENU key while the player is Stopped until
you see S/Frequency : 44.1kHz.
Move FF[▶▶] or REW[◀◀]up and down to select the sampling frequency you want. Press the
EQ/RPT button to setup.
Every time you press FF[▶▶] or REW[◀◀] , [S/Freq: 44.1KHza48KHza32KHz] is displayed in
order.. Press the EQ/RPT button to setup the desired frequency.
Tip> Generally, a good setup is 44.1KHz.
5. FM Mode
Listening to the FM Radio
Move the Mode Selection switch to FM.
Connect an earphone.
NOTE: In this product, earphones play the role of the antenna.
Adjust the Frequency in Search Mode,
Advertisement
Table of Contents
