Advertisement
※ Once recording is initiated, you may not stop recording for the first Five (5) seconds.
※ The recording is automatically recorded in the next available slot.
※ When recording for a long time, replace the battery with a new one.
※ Check the capacity of the battery prior to recording.
※ Note
Perform a test recording to avoid any errors while recording.
If the battery is completely run down during a recording, the message "low battery (BAT)" will
display on the screen and the power will be automatically shut OFF.
Replace the battery with new one. .
● Monitoring a Recording
You may listen to what is being recorded by connecting an earphone.
※ Note
-. Do not take the battery out during a recording because it may cause the recording to be lost or a
malfunction
Take out the battery only when the player is stopped.
-. If the corresponding file exceeds the recording capacity or there is not enough room for a recording, the
recording will not be available.
When the memory is FULL, a message "FULL" will display.
-. Recording to MP3 or H/D domains is not available (Only playback is available in MP3).
● Bitrate Setting
To change the recording bitrate from 16kbps to 32kbps, switch the unit to voice mode (using the mode button) and hold down
the REMAIN/EQ button until you see the desired bitrate on the LCD screen.
*When you see the desired bitrate, let go of the REMAIN/EQ button.
8)External Memory
A-B Mode Conversion
Display
9
Advertisement
