StarTech.com RKSECLK3U Quick Start Manual

3U Hinged Security Lock Panel

Product Diagram (RKSECLK3U)

1
Component
1 Hinged Security Panel • Used to access the device within the Rack.
2 • Used to secure the device within the Rack.
Lock

Requirements

For the latest requirements, please visit
• Cage Nut Tool x 1(optional)
• Phillips Head Screwdriver x 1

Package Contents

• Hinged Security Lock Panel x 1
• M5 Screws x 4
• Cage Nuts x 4
• Keys x 2
• Quick-Start Guide x 1

Installation

Notes: Make sure that there are empty Cage Nut Holes on the Rack's Rails, above and
below the Device that you wish to secure.
The Hinged Security Panel is meant to be used to secure 2U height equipment and
will render the rack unit above and below the protected device unusable.
1. Locate the Device within a Rack that you would like to secure.
2. Insert the M5 Cage Nuts (x 4) into the Cage Nut Holes on the Rack's Rails above and
below the Device.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
2
Function
www.startech.com/RKSECLK3U
Note: A Cage Nut Tool can be used to help insert the Cage Nuts.
3. Align the Cage Nut Holes on the Hinged Security Panel, with the M5 Cage Nuts
on the Rack's Rail.
4. Insert the M5 Screws (x 4) through the Cage Nut Holes and into the Cage Nuts.
5. Using a Phillips Head Screwdriver, tighten the M5 Screws.
6. When the Hinged Security Panel is installed, use the Key (included) to unlock and
lock the Lock, securing the Device.

Product Dimensions

Quick-Start Guide
Manual Revision: October 16, 2019 3:47 PM