StarTech.com LTULOCK4D Quick Start Manual

Universal 4-Digit Combination Laptop Lock | Pivot and Rotate Hinge

Product Diagram (LTULOCK4D)

1
2
3 4
Components
• Used to secure a Device to a secure stationary
1
Security Cable
object.
• Prevents the Lock from scratching the
2 Bumper Spacers
connected Device.
3 Locking Hook • Used to connect the Lock to a Lock Slot.
• Used to change the Lock head to
accommodate different lock slots.
• Standard Slot = 3x7 mm slot
4 Adapter
• Wedge Slot = 3.2x4.5 mm slot
• Nano Slot = 2.5x6 mm slot
5 Adapter Slot • Used to house the Adapter.
• Used to enter a combination on the Dials.
6
Guide Line • Align the combination digits with the Guide
Line.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
8
7
5 6
9
Function
• Used to release the Lock from the Lock Slot.
7
Release Button
8 Dials • Used to enter the Lock's combination.
• Used to set a new combination.
Note: Once the combination is changed, if you
9 Reset Screw
lose the new combination you will not be able to
reset the combination.

Requirements

For the latest requirements, please visit
• Default Combination = 0-0-0-0

Setting a New Combination

1. Align the numbers on the Dial with the Guide Line using the default combination
0-0-0-0.
2. Insert a Flathead Screwdriver (sold separately) into the Reset Screw and push the
Reset Screw in toward the Lock.
3. With the Reset Screw pushed in, turn the Reset Screw clockwise 90 degrees.
4. Rotate each of the Dials to the desired number.
5. Insert the Flathead Screwdriver into the Reset Screw and turn the Reset Screw
counter-clockwise 90 degrees, moving the Reset Screw back to its original position.
The Reset Screw will pop back out when it is in the original position.
Note: Be sure to write down the new combination and keep it in a secure location
away from the lock.
6. To set a new combination follow steps 1 - 5 using the new combination set up in
Step 4 instead of the default combination.

Installing a Lock Adapter

1. Select the Adapter that fits the Lock Slot on the Device you are trying to secure.
2. While pressing the Release button, insert the Adapter into the Adapter Slot on the
Lock, making sure that the Lock Adapter is pushed all the way into the Adapter
Slot and flush with the Lock.
Quick-Start Guide
www.startech.com/LTULOCK4D.
Manual Revision: December 30, 2019 4:34 PM