Beko BWFT710419WB User Manual page 35

Control Function button simultaneously
for 3 seconds to switch your machine to
HomeWhiz setup mode.
c. When the appliance is in HomeWhiz
setup mode, you will see an animation on
the display and the bluetooth icon will
flash until your machine gets paired with
smart device. Only programme knob will
be active in this mode. Other buttons will
be inactive.
d. Follow the instructions in display of
HomeWhiz application.
e. Wait until the installation is complete.
Once the setup is completed, give your
washing machine a name. Now, you can
tap and see the product you have added
in the HomeWhiz Aplication.
If you cannot successfully perform
the setup within 5 minutes, your
washing machine will turn off auto-
matically In this case, you will have
to start over the setup procedure. If
the problem persists contact the Au-
thorised Service Agent.
You can use your washing machine
with more than one smart appliance.
In order to do this, download the
HomeWhiz application to the other
smart appliance. When you launch
the application, you must log into the
account you previously created and
paired with your washing machine.
Otherwise, please read "Setting up a
washing machine that is connected
to someone else's account".
You need internet connection on
your smart device to proceed with
HomeWhiz setup. Otherwise, the
HomeWhiz application will not let
you finish the setup procedure suc-
cessfully. Please contact your inter-
net service provider if you are having
problems with your internet connec-
tion
HomeWhiz Application may require
you to type the product number
shown on the product label. You can
find the product label inside of the
appliance door. The product number
is located on this label.
EN / 35