Chef's Recommendations - Siemens EZ8 KZ Series Instruction Manual

Table of Contents

Advertisement

Operating the appliance
en
Selecting a cooking position and heat setting
The hob must be switched on.
Place the cookware on the cooking surface.
1.
Touch the symbol for the cooking position you
2.
require to select the cooking position. The settings
area for the cooking position you have selected will
appear on the display panel.
Swipe your finger over the settings area and touch
3.
the heat setting you require.
The heat setting is set.
Changing the heat setting
Select the cooking position and then set the required
heat setting in the control panel.
Switching off a cooking position
Touch the cooking zone indicator on the main display
until the power level
.
ó
switches itself off.
If you place an item of cookware on the cooking
Note:
surface before switching on the hob, this will be
detected when you touch the main switch and the
cooking position display will appear on the touchscreen
display.
14
appears. The cooking zone
ó

Chef's recommendations

Recommendations
When heating up puree, cream soups and thick
sauces, stir occasionally.
Set heat setting 8 to 9 for preheating.
When cooking with the lid on, turn the heat setting
down as soon as steam escapes between the lid
and the cookware. Steam does not need to escape
for a good cooking result.
After cooking, keep the lid on the cookware until you
serve the food.
To cook with the pressure cooker, observe the
manufacturer's instructions.
Do not cook food for too long, otherwise the
nutrients will be lost. The kitchen clock can be used
to set the optimum cooking time.
For a more healthy cooking result, smoking oil
should be avoided.
To brown food, fry small portions in succession.
Cookware may reach high temperatures while the
food is cooking. We recommend that you use oven
gloves.
You can find recommendations for energy-efficient
cooking in section ~ "Environmental protection"

Advertisement

Table of Contents
loading

Table of Contents