Nexcom XPPC 10-100 User Manual page 56

Chapter 4: BIOS Setup
SATA Drives
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
Main Chipset Boot
SATA Drives
Chipset-SATA Controller Configuration
Chipset SATA [Enable]
SATA Test Mode [Disabled]
SATA Port 0 UDinfo M2S 128 (128.0...
Port 0 [Enabled]
SATA Port 1 [Not Installed]
Port 1 [Enabled]
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
Chipset SATA
Enables or disables the SATA controller chipset. The SATA controller chipset
supports the 2 black internal SATA ports (up to 3Gb/s supported per port).
SATA Test Mode
Enables or disables SATA test mode.
Port 0
Enables or disables SATA port 0.
Port 1
Enables or disables SATA port 1.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Security
Enables or Disables the
Chipset SATA Controller. The
Chipset SATA controller
supports the 2 black internal
SATA ports (up to 3Gb/s
supported per port).
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
USB Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
Main Chipset
xHCI Mode
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
xHCI Mode
Enables or disables XHCI mode. Once disabled, XHCI controller function will
be disabled and all the USB devices will not be detectable and usable during
boot up and in OS. Please do not disable it unless for debugging purposes.
42
Save & Exit
Boot Security
[Enable]
Once disabled, XHCI controller
would be function disabled,
none of the USB devices are
detectable and usable during
boot up and in OS. Do not disable
it unless for debug purposes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
XPPC 10-100 User Manual