Nexcom XPPC 10-100 User Manual page 49

Chapter 4: BIOS Setup
Serial Port 2 Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
Serial Port
Enables or disables the serial COM port.
Device Settings
Displays the IO address and IRQ of the serial COM port.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Hardware Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Temperature
Detects and displays the current CPU temperature.
System Temperature
Detects and displays the current system temperature.
CPU Fan Speed
Detects and displays the current CPU fan speed.
VCORE to 1.35VDUAL
Detects and displays the output voltages.
35
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
Pc Health Status
: +37 ºc
CPU Temperature
System Temperature : +40 ºc
CPU Fan Speed : N/A
VCORE : +0.808 V
+3.3V : +3.344 V
+5V : +5.064 V
+12V : +12.000 V
+1.35VDUAL : +1.384 V
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
XPPC 10-100 User Manual