Chapter 5: Removing And Installing Customer Replaceable Units (Crus); Stand; Removing The Stand - Dell Inspiron 24 5420 Owner's Manual

The replaceable components in this chapter are Customer Replaceable Units (CRUs).
CAUTION: Customers can replace only the Customer Replaceable Units (CRUs) following the safety precautions
and replacement procedures.
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Stand

Removing the stand

Prerequisites
Follow the procedure in Before working inside your
CAUTION: When servicing the computer, place it on an elevated, clean, and flat surface. Place the display flat
on the surface with the stand hanging over the edge. It is recommended to remove the stand to avoid accidental
damage to the computer display when servicing.
NOTE: The following procedure is applicable for both Y stand and Isosceles stand.
NOTE: For replacement of stand or stand hinges, the replacement kit is shipped with both stand and stand hinges, and you
must replace both of these components together. Refer to the procedure for
stand hinges.
About this task
The following image indicates the location of the stand and provides a visual representation of the removal procedure.
Removing and installing Customer
Replaceable Units (CRUs)
computer.
Removing and installing Customer Replaceable Units (CRUs)
removing the stand hinges and
5
installing the
45