Dell Inspiron 24 5420 Owner's Manual page 105

Table 30. System setup options—Integrated Devices menu (continued)
Integrated Devices
Audio
Enable Audio
USB Configuration
Table 31. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
SATA-0
Type
Device
M.2 PCIe SSD
Type
Device
Table 32. System setup options—Display menu
Display
OSD Button management
Disable OSD Buttons
Full Screen Logo
Table 33. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
Enable or disable the integrated audio controller.
By default, all the options are enabled.
● Enable or disable booting from USB mass storage devices that are
connected to external USB ports.
By default, all options are enabled.
Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.
This page allows you to enable the onboard drives.
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the SATA-0 type information of the system.
Displays the SATA-0 device information of the system.
Displays the M.2 PCIe SSD type information of the system.
Displays the M.2 PCIe SSD device information of the system.
Enable or disable the OSD (On-Screen Display) buttons of the system.
By default, the option is disabled.
Enable or disable full screen logo.
By default, the option is not enabled.
Displays the options for on-board LAN controller.
By default, the Enabled with PXE option is selected.
BIOS setup 105