Section 5 - Detector Models; Section 6 - Base Models; Section 7 - Address Setting - Velocity VDOT-H2 Instruction Manual

Analog heat detector
Table of Contents

Advertisement

Section 5 – DETECTOR MODELS
VDOT-H2 and VDOT-H2-H may be installed in the same signaling line circuit (SLC) as the detectors below:
Model
VDOT-PY
VDOT-PYH
VDOT-DPH
Section 6 – BASE MODELS
There are 5 mounting bases that are available for use with the VDOT-H2. For VDOT-H2-H, there are 2 mounting
bases for use.
In order to operate correctly, it is important to use the appropriate mounting base as indicated in the table below. Refer
to the specific mounting base instruction manuals for details.
Model
VDOT-UB4
Standard mounting base
VDOT-UB4-6*
Larger mounting base
VDOT-S6 Base
Sounder mounting base
VDOT-STB-RL
Relay mounting base
VDOT-STB-SCI
Short circuit isolator base
VDOT-ADP**
Adapter mounting plate
* The Model VDOT-UB4-6 mounting base is intended for applications where a 4 inch square or octagonal electrical
junction box is required.
** The VDOT-ADP Adapter Mounting Plate is intended for the VDOT-STB-RL Relay Mounting Base and VDOT-
STB-SCI Short Circuit Isolator Base for applications where a 4 inch square or octagonal electrical junction box is
required.
Section 7 – ADDRESS SETTING
The VDOT-H2 and VDOT-H2-H require compatible addressable communications to the control panel in order to
function properly. All detectors have random addresses from the factory before installation. The VDOT-AD2 Address
Programmer is used for setting the address between 1 and 254 decimal of all devices prior to installation. See Annex
A for the handling. Once addressed, connect these detectors to UL listed Control Panel series.
Analog addressable photoelectric smoke detector
Analog addressable combination photoelectric smoke
and heat detector
57 °C (135 °F)
Analog addressable combination photoelectric smoke
(dual wave length) and heat detector
with
8.3 °C (15 °F)
Description
Instruction manuals
GLT-299-7-6
GLT-299-7-7
GLT-299-7-10
GLT-299-7-9
GLT-299-7-8
GLT-299-7-11
Description
with
8.3 °C (15 °F)
rate of rise
57 °C (135 °F)
rate of rise
Diameter
4 inch
6 inch
6 inch
4 inch
4 inch
6 inch
4
Instruction Manuals
GLT-299-7-1
GLT-299-7-4
GLT-299-7-5
Number of
VDOT-H2 VDOT-H2-H
Terminals
4
X
4
X
5
X
6
X
4
X
-
X
GLT-299-7-2(3) Rev.0
X
X
-
-
-
-
Jun 12, 2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vdot-h2-h

Table of Contents