Plantronics Pulsar 590 User Manual page 9

PAIRING
Pairing Headset with Universal Adapter
NOTE: The Pulsar 590A headset is paired with the universal adapter at the factory.
If adapter and headset continue to flash red rather than blue, connect or pair them
again. To reconnect, press the adapter pairing/connect button. To pair again, follow
directions below.
Begin with headset turned off.
1. Press and hold the call control button.
2. Power headset on and when the
indicator light flashes red and blue,
release the call control button.
2
While headset is flashing red and blue:
3. Power adapter on.
4. Press and hold the adapter pairing/
connect button for 7-10 seconds.
When adapter is flashing red and
blue, release the button.
Headset and adapter will flash blue
when paired successfully.
8