Planar Dome Md2/PCI Installation Manual page 2

Display controller windows 2000 windows nt 4.0 solaris 2.5.1 or later
Hide thumbs Also See for Dome Md2/PCI:
Table of Contents

Advertisement

® imaging systems, inc., 2001. All rights reserved.
Copyright © DOME
This document contains proprietary information of DOME imaging systems, inc. It is
DOME's exclusive property. It may not be reproduced or transmitted, in whole or in
part, without a written agreement from DOME. No patent or other license is granted
to this information.
The software, if any, described in this document is furnished under a license
agreement. The software may not be used or copied except as provided in the
license agreement.
DOME imaging systems, inc. provides this publication as is without warranty of any
kind, either express or implied, including but not limited to the implied warranties of
merchantability or fitness for a particular purpose. DOME may revise this document
from time to time without notice. Some states or jurisdictions do not allow disclaimer
of express or implied warranties in certain transactions; therefore, this statement may
not apply to you.
Information in this document about products not manufactured by DOME is provided
without warranty or representation of any kind, and DOME will not be liable for any
damages resulting from the use of such information.
DOME imaging systems, inc.
400 Fifth Avenue
Waltham, MA 02451-8738
(781) 895-1155 phone
(781) 895-1133 fax
Internet address for documentation: techpubs@dome.com
Internet address for product information:
i
nfo@dome.com
Internet address for sales: sales@dome.com
Internet address for technical support: support@dome.com
World Wide Web site: www.dome.com
Part No. 40-MD2PCI-15
Product Nos. 55-MD2PCI1 and 55-MD2PCI2
October 2001
DOME, the DOME logo, Calibration TQA, DIMPL, DimplX, DimFileX, Luminance
Calibration System, Md2/PCI, Md4/PCI, Md5/PCI, and Md8/PCI are either regis-
tered trademarks or trademarks of DOME imaging systems, inc. Microsoft, ActiveX,
DirectDraw, MS-DOS, Windows, and Windows NT are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other countries.
Number Nine and Imagine 128 are trademarks of Number Nine Visual Technology.
Sun, OpenWindows, and Solaris are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries. SPARC is a registered
trademark of SPARC International, Inc. Products bearing SPARC trademarks are
based upon an architecture developed by Sun Microsystems, Inc. UNIX is a registered
trademark of The Open Group in the United States and other countries. VGA is
a trademark of International Business Machines Corporation. X Window System is
a trademark of The Open Group.

Advertisement

Table of Contents
loading

Table of Contents