Cello Puro Instruction Manual page 4

Notes:
1. Make sure the water level covers the pump, but fill the fountain with water till the lower
edge of the opening.
2. Position the solar panel in full sun to optimally run the pump, the backup battery will be
charged from the solar panel during normal operation and automatically run the pump
without sunshine .
3. If required the pump can be run by the battery in times of the sun no visible. Turn on
the switch at located at the back of the solar panel, if the battery is fully charged the
pump will start to work immediately.
4. If the switch is turned o , the pump will be operated by the solar panel only.
5. If there is no water, disconnect the pump from the battery and solar panel, nnming the
pump dry will reduce the life of the pump.
6. When there is no sun,panel charged previously will power the fountain water&light for
a minimum of a few hours.In the circumstances of a period of time with No Sun,it will Not
work due to battery charged consumption being used up.
7. If the fountain is not used or before transport,please disconnect pump from the
battery.Periodically clean the pump filter.8.Battery is NONE replaceable(LI,7.4y
1500mAh)
• Specification
Power of
Size Of
Solar Panel Solar Panel
(mm)
175*140
4
Voltage of
solar panel water pump
(w)
(v)
2.8 9
Voltage of Volume
of flow
(v) (L/h)
DC4.5 -12 150 -200
Led
Battery
Light
Color of led
Capacity
Quantity
(mAh)
3 Cold white
1500
The
light