Notes
1.
You can choose the nozzles according to your preferences and
environment .
2.
Make sure solar panel gain enough sunlight . Don't cover the solar panel with
sundries or garbage.
×
3. Make sure the pool or pond has enough water so that the pump can immersed in water.
4. Put the fountain indoor during wintertime/in freezing temperatures and take the water out.
5. The fountain should be put into the water to exhaust the air when the solar fountain is used for the first time.
6. when there is enough sunlight, the spray height is too low or only a little water, please take out the filter cotton or
rotor for cleaning. (as shown in the fig.6)
The first step:
Remove the nozzle
The second step: Remove the water pump
The third step: Take out the filter cotton or rotor.
T he fourth step: Clean filter cotton or rotor
T h fifth step: Reassemble the fountain
Specifications
Size of solar
Power of
panel
solar panel
(mm)
(W)
Ф200
3.5
4
×
Voltage of
Voltage of
solar panel
water pump
(V)
(V)
9
5-9
√
Water pump
Nozzle
(fig. 6)
Volume of
Water
flow
height
(L/h)
(cm)
120 -220
20-60
Rotors
Front cover
Battery capacit
T he quantity of
y
LED light
(mAh)
200 0
24
Filter cotton
T he color of
LED
light
Cold White