Reassembly For Back Cover, Display, And Charging Port Replacement; Preparing A New Display Module - Samsung SM-S901B Repair Manual

Reassembly for Back Cover, Display, and Charging Port
Replacement
Before reassembling:
Remove the adhesive tape residues perfectly.
•
Prepare all existing screws of this device and adhesive tapes for the back glass and
•
front camera.
Wear an anti-static wrist strap and connect it to the grounded ESD safe mat.
•
Leaving screws inside the device may damage internal components, such as the
•
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.
The product's composition may vary depending on the country, region, or carrier.
•

Preparing a New Display Module

1
Using the tweezers, remove the front camera hole protection film attached to the
new display module.
Be careful not to damage the near components.
Disassembly and Assembly
74