WARRIOR 57522 Owner's Manual & Safety Instructions

7 piece bi-metal hole saw set

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
BI-METAL HOLE SAW SET
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
7 PIECE
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23e
57522

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 57522 and is the answer not in the manual?

Questions and answers

Summary of Contents for WARRIOR 57522

  • Page 1 7 PIECE BI-METAL HOLE SAW SET Visit our website at: http://www.harborfreight.com 57522 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
  • Page 2 Inspect before every use; do not be supplied by the operator. use if parts are loose or damaged. SAVE THESE INSTRUCTIONS. For technical questions, please call 1-888-866-5797. Page 2 Item 57522...
  • Page 3 Pilot Drill Bit. Tighten Set Screw. Open jaws of drill chuck (sold separately). Adapter Place the Pilot Drill Bit shaft completely into the chuck and securely tighten the chuck. Pilot Drill Bit Small Mandrel Screw For technical questions, please call 1-888-866-5797. Item 57522 Page 3...
  • Page 4 Operation Holding the drill at 90° to the workpiece, When finished, remove set the Hole Saw on the workpiece. the Hole Saw from drill’s chuck. Press the drill’s trigger to turn it on. Remove Hole Saw from the Mandrel and clean off Hole Saw with a cloth. If the drill is a variable speed type, cut the workpiece slowly until a circle Store the Hole Saws out...

Table of Contents