Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19b
Advertisement
Related Manuals for WARRIOR 56478
Summary of Contents for WARRIOR 56478
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Use the two Extension Arms (12) with to properly and completely assembled product only. longer wood stock if necessary. 11. When folding or unfolding the Miter Saw Stand, be careful not to pinch fingers. Page 2 For technical questions, please call 1-888-866-5797. Item 56478... - Page 3 Interrupter (GFCI) should also be implemented increasing the risk of vibration-related injury. – it prevents sustained electrical shock. 3. Wear suitable gloves to reduce the vibration effects on the user. SaVE tHESE inStructiOnS. Item 56478 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Specifications
Extension Arm by twisting the Lock Knob until tight. Extension 4. Repeat for the other Workpiece Support and arm (12) secure it to the other Extension Arm. Lock Knob (13) Page 4 For technical questions, please call 1-888-866-5797. Item 56478... - Page 5 Be sure Brackets are installed correctly. Do not install them backwards. incOrrEct! Brackets backwards. Item 56478 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 2. Ensure the plywood is square and drill 3/8″ holes Minimum Miter Saw Base in the four corners, 1″ in from the sides. These will be the holes for the two Mounting Brackets (21). Width of Base plus 4" Page 6 For technical questions, please call 1-888-866-5797. Item 56478...
- Page 7 Brackets Knob Extension Extension Lock Knob Lock Main Knob Lock Frame Lock Lock Knob note: To show detail on Mounting Brackets, view shown is from side opposite Miter Saw operation. Item 56478 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Operation
Ensure that the workpiece lays flat on saw table or saw blade may bind when cutting. Lock Knob 2. Tighten the Lock Knob and adjust the other Workpiece Support in the same manner. Page 8 For technical questions, please call 1-888-866-5797. Item 56478... - Page 9 4. Tighten all Lock Knobs before use. Workpiece Support Not using Stop, Using Stop, one workpiece rests Support raised flat on top of so one side of Supports. workpiece rests on Stop shelf. Workpiece Stop Item 56478 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Maintenance
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 56478... -
Page 11: Parts List And Diagram
Cross Head Screw, M6 x 37 Lock Knob Carriage Bolt, M6 x 35 End Cap Flat Washer, Ø6 x 20 x 2 Shaft Washer, Ø10 Spring Washer, Ø6 Roller Bearing Nut, M6 Item 56478 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 56478 and is the answer not in the manual?
Questions and answers