Table of Contents
Advertisement
Figure 8. Tiller Depth Adjustment
NOTE: Tillage depth is dependent on ground hard-
ness, tractor speed, skid shoe setting, and tractor
hitch adjustment. Multiple passes may be neces-
sary to achieve tillage depth.
TILLER OFFSET
The RT tillers come with a fixed gearbox offset, so that
the tiller can cover a tractor width larger than its width.
The offset is to the right as sitting in the tractor seat. By
tilling in a clockwise rotation, tire tracks can be reduced
or eliminated. Below is a chart which outlines the trac-
tor width that can be paired with a tiller.
Tiller Model
Offset
3"
RT42.30
3"
RT48.30
2.25"
RT60.40
RT72.40
2.25"
Figure 9. Tiller Offset Chart
(Rev. 3/1/3018)
MAN1177 (6/20/2016)
First Pass
Hole
Depth
1
0"
2
1"
3
2"
4
3"
5
4"
Tractor Width
48"
54"
64.5"
76.5"
Figure 10. Tiller Offset
Figure 11. Clockwise Tilling Direction
Operation 13
Advertisement
Table of Contents
