Special Functions - Grundig DTR 6000 X User Manual

SPECIAL FUNCTIONS

Set the display illumination – for
the stand-by mode
You can choose whether the display is always
displayed on level in the stand-by mode or whet-
her it displayed dim level after a desired time (10,
20, 30, 45, 60, 90, 120 or 180 second).
1 Press and hold »Menu/INFO« on the device
to open the menu, select System Settings → Ba-
cklight.
2
Select the option »System
/
with » « and confirm by pressing »OK«.
3 Select the option »Backli g ht« with »
and confirm by pressing »OK«.
4 Select the desired option "On" or 10, 20, 30,
45, 60, 90, 120 or 180 second) with »
and confirm by pressing »OK«.
5
Press »Menu/INFO« to end the setting.
Note:
The display is illuminated after pressing any
7
button.
Call up the software version
1
Press and hold »Menu/INFO« on the device
or »Menu« on remote control to open the
menu.
2 Select the option »System
with » / « and confirm by pressing »OK«.
3 Select the option »Info« with »
confirm by pressing »OK«.
– Display: Actual software version. For more
information press »
4
Press and hold »Menu/INFO« on the device
or »Menu« on remote control to end the dis-
play.
44 ENGLISH
settings«
/
/
settings«
/ « and
/ «.
--------------------------------------------------------------------------------------------
Deleting all settings (Reset)
This function enables you to reset all the custom
settings back to the default settings. All setings are
lost when you do this.
1 Open the menu with press and hold
»Menu/INFO«.
2
Select the option »System
/
with » « and confirm by pressing »OK«.
3
Select the option »Factor y reset« with
/
» « and confirm by pressing »OK«.
– A safety confirmation is displayed.
«
4 Select the option »Yes« with »
Note:
To cancel the function select the option »No«
7
«
by pressing »
5
Press »OK« to confirm setting.
– Display: »Restartin g «.
Software Update
From time to time, software upgrades may be cre-
ated with bug fixes and/or additional features.
You can either check manually or set DTR 6000
X to check periodically automatically (this is the
default). If newer available software is detected,
you will be asked if you want to go ahead with
an update. If you agree, the new software is then
downloaded and installed. After a software upg-
rade, all user settings are maintained.
Note:
Before starting a software upgrade, ensure
7
that DTR 6000 X is plugged into a stable main
power connection. Disconnecting power du-
ring an upgrade may permanently damage the
unit.
settings«
«.
r e
«.
r e