D-Link DAP-2610 Quick Installation Manual page 6

Mounting with a ceiling bracket
Installation
1. Clip two ceiling brackets onto the ceiling
panels. Make sure both brackets are in
line with each other.
2. Use the provided screws to attach the
mounting ring to the ceiling bracket.
6
Ceiling crossbar
Ceiling bracket
3. Plug the Ethernet cable into the LAN
port on the access point.
4. Place the DAP-2610's male bracket
in the mounting bracket's female
bracket. Click DAP-2610 and the
mounting bracket to lock in position.
D-Link DAP-2610 Quick Install Guide