Engine Coolant - GMC Yukon XL Denali 2005 Owner's Manual

Hide thumbs Also See for Yukon XL Denali 2005:
Table of Contents

Advertisement

Notice: Use of automatic transmission fluid labeled
®
other than DEXRON
-III, Approved for the
H-Specification, may damage your vehicle, and the
damages may not be covered by your warranty.
Always use automatic transmission fluid labeled
®
DEXRON
-III, Approved for the H-Specification.
After adding fluid, recheck the fluid level as
described under "How to Check," earlier in
this section.
When the correct fluid level is obtained, push the
dipstick back in all the way; then flip the handle
down to lock the dipstick in place.

Engine Coolant

The cooling system in your vehicle is filled with
®
DEX-COOL
engine coolant. This coolant is designed
to remain in your vehicle for five years or 150,000 miles
(240 000 km), whichever occurs first, if you add only
®
DEX-COOL
extended life coolant.
The following explains your cooling system and how to
add coolant when it is low. If you have a problem with
engine overheating, see Engine Overheating on
page 5-28.
A 50/50 mixture of clean, drinkable water and
®
DEX-COOL
coolant will:
Give freezing protection down to −34°F (−37°C).
Give boiling protection up to 265°F (129°C).
Protect against rust and corrosion.
Help keep the proper engine temperature.
Let the warning lights and gages work as they
should.
Notice: Using coolant other than DEX-COOL
cause premature engine, heater core or radiator
corrosion. In addition, the engine coolant may
require changing sooner, at 30,000 miles (50 000 km)
or 24 months, whichever occurs first. Any repairs
would not be covered by your warranty. Always use
®
DEX-COOL
(silicate-free) coolant in your vehicle.
®
may
5-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yukon denali 2005

Table of Contents