Using The Self-Cleaning Cycle - Whirlpool RF354BXG Use & Care Manual

S
ETTING THE CONTROLS
1.
Press AUTO CLEAN.
The clean indicator light will light up.
This will automatically set a 3
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1 ⁄ hour before the cycle is over.
2
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3 1 ⁄ hours, use the hour and
2
minute pads to set the cleaning time you want.
Press the "up" (s) or "down" (t) pad(s) until a
time between 2 1 ⁄ -4 1 ⁄
2 2
•
Use 2 1 ⁄ hours for light soil.
2
•
Use 3 1 ⁄ -4 1 ⁄ hours for average to heavy soil.
2 2
3.
Start the oven:
The on and heat indicator lights will light up.
NOTES:
•
Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
•
Do not attempt to open the oven door
while locking.
4.
After the Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
5.
After the Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.
6.
After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or sponge.
If needed, touch up spots with a mild abrasive
cleanser or cleaning sponge.
1 ⁄ -hour
2
hours shows on the display.
PRESS YOU SEE
AUTO
CLEAN
PRESS YOU SEE
(example for 4
time)
PRESS YOU SEE
START
ENTER
5 SEC
YOU SEE
PRESS
OFF
CANCEL

USING THE SELF-CLEANING CYCLE

ON
ON
1 ⁄ -hour cleaning
2
ON
ON
continued on next page
23