Whirlpool RF354BXG Use & Care Manual page 14

USING YOUR RANGE
T
HE ELECTRONIC OVEN CONTROL
Auto clean pad
(p. 23)
Bake pad
(pp. 15, 17)
Display
•
When you first plug in the range, "PF" will appear
on the display until you press any command pad.
If "PF" again appears on the display, your electric-
ity was off for a while.
•
When you are using the oven, the display will
show preheat times and temperature settings.
•
When you are not using the oven, the display will
be blank.
•
When setting a function, if you do not press
START/ENTER within 5 seconds, the Start?
indicator light will flash. If you do not press
START/ENTER within 5 minutes, the function
will be canceled.
Indicator lights
An indicator light to the left of the display lights up
when you are in a setting. An indicator light on the
display lights up when the oven is on.
14
BAKE
BROIL
START ?
HEAT
CLEAN
DOOR LOCKED
CUSTOM AUTO
BAKE TEMP
BROIL CLEAN
Custom
Temperature pad
broil pad (pp. 15, 17, 19, 23)
(p. 19)
ON
SELF-CLEANING OVEN
START
ENTER CANCEL
5 SEC
Using the control lock
The control lock lets you disable the control panel
command pads. The control lock comes in handy
when you want to prevent others from using the
oven.
NOTES:
•
You can only use control lock when the oven is
not in use or the control has not been set.
•
Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
To lock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear a single tone and "Loc" will
appear on the temperature display for
START
5 seconds. "Loc" will then appear when-
ENTER
ever a command pad is pressed.
5 SEC
To unlock the control panel:
Press and hold START/ENTER for 5 seconds. You will
hear a single tone and "Loc" will disappear
from the temperature display.
START
ENTER
5 SEC
Electronic
display
Start/enter pad
(pp. 14, 15, 16,
OFF
17, 19, 23)
Off/cancel pad
(pp. 15, 16, 19,
23, 24)