Page 1
IBIZA OUTDOOR FOUNTAIN Care and Instruction Manual...
Page 2
51010SNDST ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our...
51010SNDST ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. To protect the finish, place all parts on a soft surface when unpacking. More than one person may be required to complete the assembly of this product.
Page 4
51010SNDST ASSEMBLY INSTRUCTIONS Place reservoir (D) onto base (E) and rotate it to secure. Feed pump (G) cord and light cord (I) through plastic tube, make sure the cords exit out from notch on bottom of base (E). Place pump (G) and two spot lights (I) into reservoir (D).
Page 5
51010SNDST ASSEMBLY INSTRUCTIONS Place lower column (B) into reservoir (D) and twist it clockwise to secure. Feed rubber hose through plastic tube, place upper column (A) into lower column (B) and twist the upper column (A) clockwise to secure. Rubber hose...
51010SNDST ASSEMBLY INSTRUCTIONS Take out the pump (G) and attach to rubber hose, replace the pump (G) and cover the entry with pump access door (C). Rubber hose FINAL STEPS Fill the reservoir (D) with 4 gallons of distilled water. Water should remain above the fill line on pump access door while the fountain is running.
Page 7
51010SNDST ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump To keep water clean Unplug the pump from the electrical Periodically change water outlet. Use a small soft brush or place it to prevent algae buildup. under a water stream to remove debris. Tube Rotor/Impeller Impeller cover...
Page 8
51010ZC ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING cont. If abnormal noise is heard during operation (with water): • Disconnect the power supply and then remove the pump front cover and impeller cover. • Use hand to grip the impeller, gently pull the impeller/rotor assembly out of the pump housing.
51010SNDST ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
Page 10
51010SNDST ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED The water is not flowing evenly over my water feature’s surface. How do I correct this? Oil and dirt from your hands or the environment my interrupt proper water flow. Use the water guiding pad (if included with your model) or a mildly abrasive scrub pad and mild soap to clean the surface of the water feature.
Page 11
51010SNDST ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED My pump is making a loud noise. How do I fix that? 1. Be sure the pump is fully submerged in water. If it is not, and pulling in air, it will make unwanted noise. 2.
Need help?
Do you have a question about the Ibiza and is the answer not in the manual?
Questions and answers