Advertisement
XM tuner
Selecting the channel in the
Display the ID code (Radio
channel category
ID)
Channels are organized into various program
Each XM tuner is identified with a unique
categories, e.g. Rock, Classic, Jazz. You can
Radio ID. You will need the Radio ID when
search between different categories, and
activating XM service or when reporting a
then search among channels within each
problem. How to display the ID code depends
channel category.
on the channel select mode.
1
Select the channel category select
Note
mode. (Refer to "Switching the channel
select mode" above.)
Carefully check your XM Radio ID. The letters F,
I, O, and S are not used.
2
Press BAND to return to the previous
display.
Channel number select mode
3
Press
or
to select the desired
If you select CH 000, the ID code is displayed.
channel category.
Once you select a channel category, the unit
Press
or
to select the channel
searches for channels in that category.
number zero (CH 000).
During search, the channel category doesn't
immediately change even if you press the
button. To successively change the channel
Channel category select mode
category, continue pressing the button.
RADIO ID is provided as a channel category
4
Press
or
to select the desired
for displaying the ID code.
channel in the selected channel category.
The channel number moves up or down in
Press
or
to select the RADIO ID
the selected channel category.
from channel category.
Channels that cannot currently be selected
are skipped, and the next channel in that
Notes
channel category is selected.
• If you select another channel, display of the
ID code is canceled.
Note
• Display of the ID code repeats displaying
If you select a channel of another category by
RADIO ID and the ID code one after the
channel recall, etc., during steps 3 and 4, the
other.
category selected in step 3 still remains in
memory. If you press
or
, the channel num-
ber moves up or down in the category selected
in step 3 regardless of the category of the pre-
sent channel.
En
Additional Information
Messages
When problems occur with the XM tuner, a message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action.
Message
Cause
Action
ANTENNA
The XM antenna is not
Check whether the XM antenna cable is
connected.
attached securely.
A short-circuit occurring in
Make sure that there is nothing unusual
the antenna or the surrounding
with the antenna or antenna cable. Turn the
antenna cable.
ignition off and then on.
UPDATING
Radio is being updated with
Wait until the encryption code is fully
latest encryption code.
updated. Channels 000 and 001 should
function normally.
NOSIGNAL
XM signal is too weak at the
Wait until the car reaches a location
current location.
with a stronger signal.
LOADING
Unit is acquiring audio or
Wait until the unit has received the
program information.
information.
OFF AIR
The channel currently selected
Select another channel.
has stopped broadcasting.
– – – – – – – –
The user has selected a channel
Automatically switches to Channel 001.
number that does not exist or is
not subscribed to.
– – – –
There is no artist name/feature,
No action needed.
song/program title, or channel
category associated with the
channel at that time.
Note
When the messages that is not listed above are displayed, refer to the operation manual supplied
with the head unit.
En
Additional Information
Specifications
General
Power source ...................... 14.4 V DC (10.8 – 15.1 V
allowable)
Grounding system .............. Negative type
Max. current consumption
............................................. 2.0 A
Dimensions (W
× H × D) ..... 179 × 27 × 139 mm
(7 × 1 × 5-1/2 in.)
Weight ................................. 0.57 kg (1.26 lbs)
XM tuner
Frequency range ................. 2,332.50 – 2,345.00 MHz
Usable sensitivity
Satellite ....................... – 105.0 dBm
Terrestrial .................... – 102.0 dBm
Audio
Signal-to-noise ratio ........... 90 dB (IHF-A network)
Separation .......................... 85 dB
Antenna
Power source (Provided by the satellite line)
............................................. 4.9 V DC
(4.4 – 5.4 V allowable)
Max. current consumption
............................................. 0.1 A
Type ..................................... Active type
Dimensions
Base (W × H × D) ........ 29 × 14 × 40 mm
[1-1/8 × 1/2 × 1-5/8 in]
Cord ............................. 5 m
Weight ................................. 0.06 kg (0.13 lbs)
Note
Due to possible improvements, specifications
and design are subject to change without
notice.
En
Advertisement
