Advertisement
XM tuner
Power supply for this unit
Selecting the XM source
The method for turning this unit's power
supply ON/OFF differs according to other
1
Press SOURCE to turn the head unit
units you combine with it.
on.
2
Press SOURCE to select "XM" source.
When combining this unit with
Press SOURCE repeatedly to switch between
either AVIC-D1, AVIC-N1, or AVIC-
the following sources:
N2:
XM tuner—Tuner—Television—DVD
• This unit's power supply can be turned
player/Multi-DVD player—Built-in CD
OFF only if the ignition switch is turned
player—Multi-CD player—External
OFF.If for any reason you want to switch
unit 1—External unit 2—AUX
the power of the unit OFF, switch the vehi-
cle's ignition off (turn the ACC of your
Note
vehicle to OFF).
To quit listening to the XM tuner, press
SOURCE to switch to another source or press
When combining with another head
SOURCE and hold until the head unit turns off.
unit (or AV head unit):
• When the head unit's power supply is OFF,
this unit is also OFF. (Selecting a source
other than XM tuner will not turn this
product off.)
• This unit's power supply can be turned
OFF if the ignition switch is turned OFF. If
for any reason you want to switch the
power of the unit OFF, switch the vehicle's
ignition off (turn the ACC of your vehicle to
OFF).
En
XM tuner
Listening to XM
1
Press SOURCE to select a XM source.
2
Press BAND to select a band.
Press BAND until the desired band is dis-
played, XM1, XM2 or XM3.
3
Press
or
to select the desired
channel.
The channel number moves up or down suc-
cessively.
Channels that cannot currently be selected
are skipped, and the next channel is
selected.
If you press and hold
or
, you can
These are the basic steps necessary to oper-
increase or decrease channel number continu-
ate the XM.
ously.
You can also select a channel from a desired
XM channel select setting indicator
channel category. (Refer to "Switching the
Shows what channel select setting has
channel select mode".)
been selected. CH.No is displayed when
CH NUMBER is selected, and CAT is dis-
4
Press SOURCE and hold until the head
played when CATEGORY is selected.
unit turns off or press SOURCE to select
another source.
XM channel number indicator
Shows to which XM channel number the
tuner is tuned to.
XM band indicator
Notes
Shows the XM band which has been
• When you turn the power on, change the
selected.
source to XM tuner, or select a channel, it
may take a few seconds while this unit
XM preset number indicator
acquires and processes the satellite signal
Shows what XM preset has been selected.
before you can hear anything.
• Depending on the head unit, it may be possi-
XM channel name
ble to switch to channel number direct input
Shows the channel name of broadcast
mode using the allocated button on the
channel.
remote control (e.g. DIRECT). For details,
refer to the manual of the head unit.
En
XM tuner
Storing and recalling chan-
Switching the XM display
nels
XM channels each have a channel number
and channel name. XM programing also
If you press any of the preset tuning buttons
carries the song or program title, the artist
1–6 you can easily store up to six channels
name and category when available.
for later recall with the touch of a button.
• Memory and recall are for broadcasts. If
Press DISPLAY.
you recall a memorized broadcast that
Press DISPLAY repeatedly to switch between
has been moved to another channel, the
the following settings:
channel to which the broadcast was
Channel name—Artist name/feature—
moved is selected.
Song/program title—Channel category
When you find a channel that you
want to store in memory, press one of the
preset tuning buttons 1–6 and hold until
the preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected channel has been stored in
memory.
The next time you press the same preset tun-
ing button, the channel is recalled from
memory.
Notes
• Up to 18 channels, six for each of the three
XM bands, can be stored in memory.
• When channel number select mode is
selected, you can also use
and
to recall
channels assigned to preset tuning buttons
1–6.
• If a channel you have recalled cannot be
selected, a message is displayed for 2 sec-
onds and the unit returns to the operating
status before the channel was recalled.
En
XM tuner
Introduction of advanced
Switching the channel
tuner operation
select mode
When selecting a channel, you can switch
between selecting a channel by channel
number or by channel category.
Initially, channel number select mode is
selected.
1
Press FUNCTION to select MODE.
Press FUNCTION until MODE appears in the
display.
Function display
2
Press
or
to select the desired
Shows the function status.
channel select mode.
Press
or
repeatedly to switch between
Press FUNCTION to display the func-
the following settings:
tion name.
CH NUMBER (Channel number select
Press FUNCTION to display the following
mode)—CATEGORY (Channel category
function:
select mode)
MODE (Channel select mode)
To return to the XM display, press BAND.
Note
Depending on the head unit you are using, it
may be possible to directly switch between the
channel select mode using the allocated button
(e.g. CLOCK). For details, refer to the manual of
the head unit.
En
Advertisement
