Starting The Programme; Cancelling The Programme - Beko DIN29332 Instruction Manual

functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will
start flashing.
3. Set the desired time by pressing
the Time Delay key. Time will
increase with increments of 30
minutes up to 6 hours and after
that in 1 hour increments up to 24
hours every time you press the key.
4. Close the door of your machine
after setting the Delayed Start.
Once the delay time is over, the
selected programme will start
automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay time.
C
Programme and auxiliary functions
cannot be set/changed after the
programme has started.
To cancel the Time Delay function
1. Press and hold the Programme
Selection / Programme Cancel keys
for 3 seconds.
2. '3', '2', '1' will appear on the display
while you keep Programme
Selection / Programme Cancel
keys pressed. Time Delay indicator
will turn off at the end of the
cancellation process and delaying
process is cancelled.
C
You can select and start a
new programme following
the cancellation of Time Delay
function.
C
Time Delay function cannot be set
after the programme starts.

Starting the programme

Close the door of your machine to
start it after selecting the programme
and auxiliary functions.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Washing time can change
while the programme is running
depending on the ambient
temperature where your machine
is installed, temperature of the
supply water and amount of the
dishes.
C
Pay attention not to open the door
of the machine when it is running.
There may be a rush of vapour
when you open the door of your
machine; be careful.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the water
softener cleaned, and then it will
resume running in drying mode.

Cancelling the programme

Press and hold the Programme
Selection / Programme Cancel keys
for 3 seconds. Release the key as the
Start/Cancel indicator starts flashing.
Once you close the door of your
machine, draining is completed in 2
minutes
and the machine gives an audible
warning when it is completed.
C
There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
36 EN