How To Use Remote Control - IDEAL Seattle DC Series Instruction Manual

Turn right to lock the lower housing firmly to the motor bracket.
STEP FOR LEARNING CODE
Learning code matching mode is used between emitter and receiver. Turn <ON= the supply
power within 30 seconds and press the emitter's <FAN ON/OFF= button for 5 seconds, it can load
normally after hearing a long sound beep, which means learning successfully and it can works
normally. (PS: Learning mode is not accepted after turn <ON= the supply power for 30 seconds.)
LOWER HOUSING INSTALLATION

HOW TO USE REMOTE CONTROL

1. F/R button: Press F/R button to set up ceiling fan
operate in forward or reverse.
2. FAN ON/OFF button: Press to turn ON or turn OFF
the ceiling fan.
3. Timer button: Press Timer button to enable fan to
automatically switch OFF after 1Hr-4Hr-8Hr.
4. Light ON/OFF button: Press to turn ON/OFF light
(N/A).
5. Speed button: Press to turn on ceiling fan at
1-2-3-4-5 speed. (The fan will resume operation at
the last speed setting before power off.)
8