Summary of Contents for Pet Gear The ON-THE-GO Pet EASY STEP II
Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL EASY STEP II PG9710/PG9720 To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
PARTS LIST Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Left Panel Right Panel Risers Dowel Bottom Stair Top Stair with Straight Edge with Curved Side EASY STEP II • PG9710/PG9720...
Page 3
ASSEMBLY INSTRUCTIONS Step 1 Place right panel, part (B) on floor with PET GEAR Logo facing the floor and insert top stair, part (E). Keep the STRAIGHT EDGE toward the back and rug facing the top. Make sure there are no gaps between parts after inserting.
Page 4
ASSEMBLY INSTRUCTIONS Step 5 Insert dowel, part (D). Make sure there are no gaps between parts after inserting. Step 6 Attach left panel, part (A). Align all holes before pushing panel down. Make sure there are no gaps between parts after inserting.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame. Failure to follow these warnings and the instructions could result in serious injury or death.