Speaker Setting; The System Setup Menu - Pioneer VSX-816-K Operating Instructions Manual

07

The System Setup menu

1 Select 'Manual SP Setup' then press
ENTER.
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
2 Select the setting you want to adjust.
If you are doing this for the first time, you may
want to adjust these settings in order:
• Speaker Setting – Specify the size and
number of speakers you've connected
(page 40).
• Crossover Network– Specify which
frequencies will be sent to the subwoofer
(see Crossover Network below).
• Channel Level – Adjust the overall balance
of your speaker system (page 41).
• Speaker Distance – Specify the distance
of your speakers from the listening position
(page 42).
3 Make the adjustments necessary for
each setting, pressing RETURN to confirm
after each screen.

Speaker Setting

Use this setting to specify your speaker
configuration (size, number of speakers). It is a
good idea to make sure that the settings made
in Automatically setting up for surround sound
(MCACC) on page 9 are correct.
Note
1 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround, and
surround back speakers can't be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent
to the subwoofer.
40
En
4.Manual SP Setup
a.Speaker Setting
b.Crossover Network
c.Channel Level
d.Speaker Distance
: Exit
:Return
1 Select 'Speaker Setting' from the
Manual SP Setup menu.
4.Manual SP Setup
a.Speaker Setting
b.Crossover Network
c.Channel Level
d.Speaker Distance
:Return
2 Choose the set of speakers that you
want to set then select a speaker size.
Use to select the size (and number) of
each of the following speakers:
• Front – Select LARGE if your front
speakers reproduce bass frequencies
effectively, or if you didn't connect a
subwoofer. Select SMALL to send the bass
frequencies to the subwoofer.
• Center – Select LARGE if your center
speaker reproduces bass frequencies
effectively, or select SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn't connect a center
speaker, choose NO (the center channel is
sent to the front speakers).
• Surr – Select LARGE if your surround
speakers reproduce bass frequencies
effectively. Select SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn't connect surround
speakers choose NO (the sound of the
surround channels is sent to the front
speakers or a subwoofer).
4a.Speaker Setting
Front SMALL
Center [ SMALL ]
Surr [ SMALL ]
SB [ SMALL x2 ]
SUB W. [ YES ]
:Finish
1