Related Manuals for KNIPEX 16 60 06 SB
Summary of Contents for KNIPEX 16 60 06 SB
- Page 1 KNIPEX Quality – Made in Germany Operating instructions 16 60 06 SB Stripping Tool for coax and data cables...
-
Page 2: Table Of Contents
CONTENTS General Notes on operating instructions Symbols used Copyright Guarantee and warranty Safety Intended use Design and function Design Function Operation Stripping coax cables Cutting and stripping CAT 5 - 7 data cables (UTP / STP) 4.3 Cutting and stripping flat cables (Telephone cables 4p / 6p / 8p) Maintenance Technical data Technical data... -
Page 3: General
1.3 Copyright These operating instructions and all documentation supplied with this tool are protected by copyright and remain the property of KNIPEX. The reprinting of these instructions, even in extract form, is only permitted with the written consent of C. Gustav Putsch KG. -
Page 4: Guarantee And Warranty
• Repairs or conversions are carried out by unauthorized persons. • Original accessories or spare parts from KNIPEX are not used. • Defective components are not repaired immediately to minimise the extent of the damage and so as not to impair the safety of the tool (obligation to repair). -
Page 5: Design And Function
DESiGN aND fuNCTiON Design and function 3.1 Design Design of the stripping tool Legend: 1 Holder for coax cable 2 Adjustment wheel for data-cable stripping blade 3 Blade for cutting data cables 4 Ribbon cable (telephone cable) holder 5 Roughened surface for trimming off shielding wires 6 Blade insert for selecting cable type (coax cable) 7 Data cable holder 8 Finger loop for turning the tool... -
Page 6: Operation
OpEraTiON Operation 4.1 Stripping coax cables Depending on the cable type (RG 59 / RG 6 or RG 7 / RG 11), the black blade insert is used in two different positions. RG 59, RG 6 RG 7, RG 11 Adjusting the tool for different cable types 1. -
Page 7: Cutting And Stripping Cat 5 - 7 Data Cables (Utp / Stp)
OpEraTiON 4.2 Cutting and stripping CAT 5 - 7 data cables (UTP / STP) Depending on the cable type and insulation thickness, the height of the blade has to be adjusted individually (+/-). 1. Cut off the end of the cable being stripped, ensuring a straight cut. Note: To avoid damaging the conductors in the cable, do not set the stripping blade too... -
Page 8: Cutting And Stripping Flat Cables
OpEraTiON 4.3 Cutting and stripping flat cables (Telephone cables 4p / 6p / 8p) Note: During repeated use, check the holder for any cable remnants and remove them as necessary. Cutting and stripping ribbon cables 1. Place the end of the cable in the ribbon cable holder. 2. -
Page 9: Maintenance
MaiNTENaNCE Maintenance The tool is maintenance-free. Technical data 6.1 Technical data Technical data Unit Item number – 16 60 06 SB Length Weight Properties – with opening spring Cable types – RG 6, RG 7, RG 11, RG 59, data cables, telephone ribbon cables Disposal The tool can be disposed of as household waste. - Page 10 KNIPEX-Werk C. Gustav Putsch KG 42337 Wuppertal Tel.: +49 202 – 47 94-0 Fax: +49 202 – 47 74 94 info@knipex.com www.knipex.com...
Need help?
Do you have a question about the 16 60 06 SB and is the answer not in the manual?
Questions and answers