Grounding Instructions - commercial cool CCD25JW Manual

SAFETY INFORMATION

GROUNDING INSTRUCTIONS

ELECTRICAL REQUIREMENTS
In the event of malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. The
appliance must be connected to a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
DANGER - Improper connection of the equipment grounding conductor
can result in a risk of electric shock. The conductor with insulation
having an outer surface that is green with or without yellow stripes is the
equipment grounding conductor. If repair or replacement of the cord or
plug is necessary, do not connect the equipment-grounding conductor to
a live terminal. Check with a qualified electrician or service person if the
grounding instructions are not completely understood, or if in doubt as
to whether the appliance is properly grounded. Do not modify the plug
connected to the appliance – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
The appliance is for use on a nominal 120V circuit
and should be connected to a grounding outlet
that looks like the one illustrated to the right. The
use of a temporary adaptor is not recommended.
POWER SUPPLY CORD
1. Extreme care must be exercised with the use of an
extension cord:
a) Use only a grounding type 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept the plug on the appliance.
b) The marked electrical rating of the cord set or extension cord must be equal
to or greater than the electrical rating of the appliance. The longer cord should
be arranged so that it will not drape over the counter top or table top where it
can be pulled on by children or tripped over unintentionally.
NOTE: Neither COMMERCIAL COOL nor the dealer can accept any liability for damage to the
product or personal injury resulting from failure to observe the electrical connection
procedures.
Page 5